With that said, it’s good to look at a field repair as a Temporary fix. Many of the boats that come to me with a repair done in field require a great deal more work because people try to affect a permanent repair while on the river. Without the suitable environment and tools, it’s hard to get a proper permanent fix. Obtaining a good permanent patch, once in the shop, can end up being more costly because of damage caused by the incorrect field repair itself. For a field PVC and Urethane temporary repair the techniques and process used are the same. Clean and dry the damaged area inside and out. Measure the size of the damaged area to determine what size patch will be needed.

Pinnacle-studio-15-klyuch-aktivacii_id864562ids1s.exe 594.23 KB. 热门搜索 真空 4655 BCV-034 17 梅麻吕 84 dv-1622 29 heyzo 0406 106 寻找里美 61 pr社九尾狐狸 10 內射 6830 持月真由 228 水柔姐姐 254 ABP228 11 REAL-604 8 PPPD-408 74 捆绑 3182 HODV-21134 12 最新众筹 324 泰国四级 9 IPX-077 27 摄影师. KLUCH application will help to make a presentation of the interior design of the premises at a new high level.

The size of the hole or tear determines the method of repair needed. A) For small holes, repair tape or duct tape may work. B) For larger holes 2-6 inches in size an exterior patch alone should do the trick.

C) For tears and holes 6 or more inches, an interior patch may be needed. Duct tape works great as a field interior patch. This will add structure and extra holding power to the repair.

Cut out the appropriate size patch material. This should be 2 ½ to 3 in. Larger than the damaged area in all directions.

Now that you’ve got the right size patch, it’s time to prep and glue. Apply MEK to a piece of cloth and rub the area to be patched briskly to remove the shine from the material. Ansys 17 crack. You should see the color of your boat coming off onto your cloth. The surface of the material should begin to get tacky. Be sure to do this to both the boat and patch surfaces to be glued. At Goodwater Boat Works, we prefer to use Stabond orCliftonadhesives to get the best results with these techniques. With a brush, apply a light coat of adhesive to the patch and boat on the area to be glued.

Allow 20 to 30 minutes for the adhesive to totally dry before attaching the patch to the boat.(One coat of adhesive should be all that’s needed). After the adhesive is fully dry to the touch, reactivate the surface by wiping it down with MEK. Now affix patch to boat by starting at the middle and applying pressure, working your way towards the outside, to remove any air bubbles. This technique is best done with a pusher tool. It’s best to set up camp and let the patch cure overnight.